Miscellaneous Problems - Sharp AR-C200P - Color Laser Printer User Manual

Miscellaneous Problems

The power is on, but the printer does not go online.
Possible Cause
Bad connection
Print processing does not start.
Possible Cause
Printer error
Print processing cancels.
Possible Cause
The printer interface cable
is faulty.
The time out setting is too
short.
Printer makes a strange noise.
Possible Cause
The printer is not
horizontal.
There are scraps of paper
or other foreign matter
inside the printer.
The top cover is not firmly
shut.
Remedy
Switch off the printer and disconnect the power
cable. Reconnect power cable and switch printer on.
If this does not clear the fault, call for service.
Remedy
Check the control panel. If an error message is
displayed, correct the problem.
Remedy
Replace the printer interface cable.
Reset time out to a higher value.
Remedy
Place the printer on a stable, level surface.
Check the inside of the printer and remove any such
objects.
Press the left and right sides of the top cover.
Sharp AR-C200P: Troubleshooting • 328