Pcl Emulation Menu - Sharp AR-C200P - Color Laser Printer User Manual

Item
FONT
SOURCE
FONT NO.
FONT PITCH
FONT HEIGHT

PCL Emulation Menu

The default settings are
Value
Resident; DIMM0;
Downloaded
I000, C001, S001
0.44 cpi to 99.99 cpi in 0.01
cpi increments
Default = 10.00 cpi
4.00 to 999.75 point, in 0.25
point increments
Default = 12.00 point
Sharp AR-C200P: Setting up • 52
bold
.
Description
Selects location of the PCL font
used.
DIMM0 is displayed only when font
DIMM ROM exists in the slot.
Downloaded only appears if fonts
have been down loaded to the
printer.
Sets the PCL font number.
I = internal (resident font); I000 =
Courier.
C = Font stored in the printer's Flash
memory.
S = downloaded soft font, stored on
the printer's internal hard disk drive.
Applies only to printers with a hard
disk drive installed.
Sets the font width in characters per
inch. Only displayed if the font is a
fixed spacing outline font.
Sets the font point size. Applies only
to fixed fonts (does not apply to
proportional fonts).