Sharp DM 2000 - B/W Laser Printer Operation Manual page 41

Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Stream feeding mode
Auto power shut-off setting
Border line for 2 in 1 or 4 in 1 * 0 e OFF
Rotation copy
Auto paper select mode
Auto tray switching
Erase width adjustment
Layout in 2 in 1 copy
Layout in 4 in 1 copy
Offset of paper output tray
Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 63.
4
Select the desired parameter using the numeric keys.
The entered parameter number will blink on the right side of the copy
●
quantity display.
The parameters are shown in the table below.
●
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
Parameters
0 e OFF 1 e 30 sec.
5 e 10 sec.
0 e OFF 1 e 30 sec.
* 1 e 30 min. 2 e 60 min.
* 0 e OFF 1 e ON
0 e OFF * 1 e ON
1 e ON
0 e OFF * 1 e ON
0 e OFF * 1 e ON
0 e OFF * 1 e ON
0 e 0 mm 1 e 5 mm
* 1 e Pattern 1 2 e Pattern 2
* 1 e Pattern 1 2 e Pattern 2
0 e Upper OFF, lower OFF
2 e Upper ON, lower OFF
5
Press the START key.
The right-hand number in the copy quantity display will be steadily lit
●
and the entered value will be stored.
6
To continue with other user programs, press the
and then repeat steps 2 to 5. To exit the user program
mode, press the light (
All the alarm indicators will go out.
●
* 2 e 60 sec. 3 e 90 sec.
2 e 60 sec. * 3 e 90 sec.
3 e 90 min. 4 e 120 min.
* 2 e 10 mm 3 e 15 mm
3 e Pattern 3 4 e Pattern 4
* 1e Upper ON, lower ON
3 e Upper OFF, lower ON
If you select "0" (OFF) in a program, the corresponding
function will be disabled.
) key.
USER PROGRAMS
4 e 120 sec.
4 e 120 sec.
5 e 240 min.
4 e 20 mm
key
39