Sharp DM 2000 - B/W Laser Printer Operation Manual page 17

For manual copy density adjustment, press the AUTO/MANUAL/
●
PHOTO key to select MANUAL and adjust with the light (
dark ( ) keys as desired.
For photographs, select PHOTO and then adjust with the light (
●
and dark ( ) keys as desired.
There are 5 exposure steps indicated by 3 indicator lights. (The
●
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
6
Set the number of copies using the numeric keys.
A single copy can be made with the initial setting, i.e., when "0" is
●
displayed.
Press the CLEAR (
●
7
Press the START key.
The number in the copy quantity display will decrease by 1 each time
●
a copy is made.
Press the CLEAR (
●
To repeat the same copy sequence for a different original, simply
●
replace the original and press the START key.
How to remove the platen cover
The platen cover can be removed to allow copying of
bulky objects. To remove it, simply lift the platen cover
straight up.
To reattach the platen cover, reverse the above procedure.
●
NORMAL COPYING
) key to clear an entry if a mistake is made.
) key to stop copying in the middle of a run.
) and
)
15