Replacing The Maintenance Kit; Before Replacing - Ricoh Aficio SP 4310N Hardware Manual

Replacing the Maintenance Kit

• The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot
surface". Otherwise, an injury might occur.
• Grip the plug, not the cord, when pulling the plug from the socket. Pulling the cord causes wear
and tear that can result in fire or electric shock.
• Wait at least one hour after power off before replacing parts. Not allowing the printer to cool
may result in burns.
When to replace the Maintenance Kit.
The maintenance kit contains parts for maintaining the printer.
Replace the maintenance kit if the following message appears on the display:
"Replacmnt Requrd:Maint. Kit"
Replacmnt Requrd:Maint. Kit
Maintenance Kit Replacmnt
is required. Press Menu
key to check Supplies.
When the following message appears on the display, the maintenance kit contains parts should be
replaced soon. Prepare a new maintenance kit.
"Repl Requrd Soon:Maint. Kit"
Repl Requrd Soon:Maint. Kit
A new kit is required.

Before Replacing

Replace all the parts included in the Maintenance Kit at the same time. To replace them, follow the
procedure below:
1. Turn off the power, and then unplug the power cable.
CEE120
CEE119
Replacing the Maintenance Kit
7
161