Ricoh Aficio SP 3500N Hardware Manual page 118

8. Troubleshooting
Status
It takes too much time to resume
printing.
It takes too much time to
complete the print job.
Images are cut off, or excess
pages are printed.
Photo images are coarse.
116
Possible Causes, Descriptions, and Solutions
• The data is so large or complex that it takes time to process it.
If the Data In indicator is blinking, the data is being processed.
Just wait until it resumes.
• The printer was in the Energy Saver mode. To resume from the
Energy Saver mode, the printer has to warm up, and this takes
time until printing starts. To disable Energy Saver mode:
1. Press the [Menu] key on the control panel, select
[System], and then press the [OK] key.
2. Press the [ ] or [ ] key and select [Energy Saver 2], and
then press the [OK] key.
3. Press the [ ] or [ ] key, and then select [Off].
• Photographs and other data intensive pages take a long time
for the printer to process, so simply wait when printing such
data.
Changing the settings with printer driver may help to speed up
printing.
See the printer driver Help.
• The data is so large or complex that takes time to process.
If the Data In indicator is blinking, the data is being processed.
Just wait until it resumes.
• If the Data In indicator on the control panel is flashing, the
printer is warming up. Wait for a while.
If you are using paper smaller than the paper size selected in the
application, use the same size paper as that selected in the
application. If you cannot load paper of the correct size, use the
reduction function to reduce the image, and then print.
See the printer driver Help.
Some applications lower the resolution for making prints.