Ifaddr] Command - WELLTECH LAN PHONE 101 H.323 Manual

Hide thumbs Also See for LAN PHONE 101 H.323:

Table of Contents

LAN Phone 101 User Manual Guide

6. [ifaddr] command

Configure and display the LAN Phone 101 IP information.

1. -ip, -mask, -gate: Set LAN Phone 101 IP Address, subnet mask and default gateway

respectively.

2. -dhcp: When DHCP function enables (ifaddr –dhcp 1), LAN Phone 101 will automatically

search DHCP server after execute the commit and reboot command.

Note: After LAN Phone catch a dynamic IP address form DHCP server, user can see this IP

address on LCD connect configuration.

3. -sntp: When sntp server is available, enable LAN Phone 101 SNTP function and point to

sntp server IP address. (ifaddr –sntp 1 "xxx.xxx.xxx.xxx")

4. –timezone: User can set different time zone according to the location LAN Phone is.For

example, in Taiwan the time zone should be set as 8,which means GMT+8. (GMT-8:

ifaddr –timezone -8)

5.-ipsharing: If LAN Phone 101 is behind a IP-sharing , user can enable IP sharing function

and specify public IP address.(ifaddr –ipsharing 0/1 "public IP address of IP sharing" , 0

for disable and 1 for enable)

Document Ver. 1.5

LAN Phone Ver 109

Release 2002/06/07

Table of Contents

Lan phone 101