Introduction - CDA RV 1000 Series Installation Instructions Manual

Congratulations on your purchase of this
designed and produced to give you many years of satisfactory use.
Before using this appliance it is essential that the following instructions are carefully
read and fully understood.
We would emphasise that the installation section must be fully complied with for your
safety to ensure that you obtain the maximum benefits from your appliance.
Fig. 1
Declaration of
✓
This cooker has been designed, constructed and marketed in compliance with:
- Safety requirements of EU Directive "Gas" 90/396/EEC;
- Safety requirements of EU Directive "Low Voltage" 2006/95/EC;
- Protection requirements of EU Directive "EMC" 89/336/EEC;
- Requirements of EU Directive 93/68/EEC.
4

Introduction

CE
conformity
CDA cooker which has been carefully
B
A
Assembling
the backguard
■
Remove the two
spacers "A" and the
screw "B" from the
rear of the cooktop.
■ Assemble the back-
guard as shown in
figure 1 and fix it by
screwing the central
screw "B" and the
spacers "A".
GB