Hostname; Ip Address; Ip Name Server - VMware VSHIELD APP 1.0 Admin Manual

hostname

Changes the name of the CLI prompt.
the default prompt name for the vShield App is vShield.
Syntax
word
hostname
Option
word
CLI Mode
Configuration
Example
vShield(config)# hostname vs123
vs123(config)#

ip address

Assigns an IP address to an interface. On the vShield virtual machines, you can assign an IP addresses to the
mgmt interface only.
To remove an IP address from an interface, use no before the command.
Syntax
[no] ip address
Option
A.B.C.D
M
CLI Mode
Interface Configuration
Example
vShield(config)# interface mgmt
vShield(config-if)# ip address 192.168.110.200/24
or
vShield(config)# interface mgmt
vShield(config-if)# no ip address 192.168.110.200/24
Related Commands
show interface

ip name server

Identifies a DNS server to provide address resolution service. You can also identify one or more DNS servers
by using the vShield Manager user interface. See "Identify DNS Services" on page 22.
To remove a DNS server, use no before the command.
VMware, Inc.
The default prompt name for the vShield Manager is manager, and
Description
Prompt name to use.
A.B.C.D M
/
Description
IP address to use.
Subnet mask to use.
Appendix A Command Line Interface
99