Configuration Commands; Clear Vmwall Rules; Cli Ssh Allow; Copy Running-Config Startup-Config - VMware VSHIELD APP 1.0 Admin Manual

Appendix A Command Line Interface

Configuration Commands

clear vmwall rules

Resets the firewall rule set on a vShield App to the default rule set. This is a temporary condition that can be
used to troubleshoot firewall issues. You can restore the firewall rule set by performing a force sync operation
for the vShield App from the vShield Manager. Fore more information on forcing synchronization, see "Force
a vShield App to Synchronize with the vShield Manager" on page 64.
Syntax
clear vmwall rules
CLI Mode
Privileged
Usage Guidelines
vShield App CLI
Example
manager# clear vmwall rules
Related Commands
show vmwall log
show vmwall rules

cli ssh allow

Enable or disable access to the CLI via SSH session.
Syntax
[no] cli ssh allow
CLI Mode
Configuration
Usage Guidelines
Use this command with the ssh command to allow or disallow CLI access via SSH.
Example
manager(config)# ssh start
manager(config)# cli ssh allow
Related Commands
ssh

copy running-config startup-config

Copies the current system configuration to the startup configuration. You can also copy and save the running
CLI configuration of a vShield App from the vShield Manager user interface. See "Back Up the Running CLI
Configuration of a vShield App" on page 64.
Syntax
copy running-config startup-config
CLI Mode
Privileged
VMware, Inc. 97