VMware VSHIELD APP 1.0 Admin Manual page 55

7 Click Commit to save the rule.
8 If DHCP service has not been enabled, enable DHCP service.
See "Start or Stop vShield Edge Services" on page 59.
To add a DHCP static binding
1 In the vSphere Client, go to Inventory > Networking.
2 Select an internal port group that is protected by a vShield Edge.
3 Click the vShield Edge tab.
4 Click the DHCP link.
5 Under Static Bindings, click Add Bindings.
A new row appears in the table.
6 Double‐click each cell in the row to enter or select the appropriate information.
The Primary Name Server and Secondary Name Server fields refer to DNS service. You must enter the IP
address of a DNS server for hostname‐to‐IP address resolution.
The Domain Name and Lease Time fields are optional. The default lease time is one day.
7 Click Commit to save the rule.
8 If DHCP service has not been enabled, enable DHCP service.
See "Start or Stop vShield Edge Services" on page 59.
VMware, Inc.
Chapter 10 vShield Edge Management
55