4.30 Fluorescent Lamp
4 Replacement Procedures
Assembling the 14.1-inch XGA TOSHIBA Fluorescent Lamp
To assembling the 14.1-inch XGA TOSHIBA fluorescent lamp, follow the steps below and refer to
figures 4-143 to 4-149.
Putting the double-sided tapes on the bezel
1. Attach the double-sided tape to the reverse side of the bezel, as shown in Figure 4-143.
Figure 4-143 Attaching double-sided tape to the bezel's reverse side
Satellite A20 Maintenance Manual (960-444)
4-185