4 Replacement Procedures
4. Using the U-shaped edge of the bezel as a "hinge," raise the edge of the bezel from which
the latches have been removed. Then remove the bezel. Peel off the tape for GND wire
fixing (J).
5. Flip the bezel over and remove the two screws (E) and lamp cover (F). Then replace the
lamp unit (G) with a new one.
4-194
Figure 4-153 Removing the bezel
Figure 4-154 Removing the lamp cover
4.30 Fluorescent Lamp
Satellite A20 Maintenance Manual (960-444)