4.30 Fluorescent Lamp
Figure 4-138 Removing the tape and insulation sheet
Removing the screws
1. Spread out the insulation sheet without detaching it from the side of the bezel, as shown in
Figure 4-139.
2. In the order (1) and (2) shown in Figure 4-139, remove the screws from the left- and right-
hand sides of the module.
CAUTION: To unfasten the screws, use an insert bit of point size 0 for Philips
screwdrivers.
Satellite A20 Maintenance Manual (960-444)
Figure 4-139 Removing the screws
4 Replacement Procedures
4-181