4.24 Speakers
3. Remove the two tapes securing the speaker cables.
4. Remove the speakers and speaker cables from their guides.
5. Remove the side speaker (right and left) from the front of the computer.
Installing the Speakers
To install the speakers, follow the steps below and refer to figures 4-34 and 4-35.
1. Install the side cover (right and left) on the front of the computer.
2. Place each speaker from the back and secure the side covers with the following screws.
M2.5 6
3. Route the speaker cables through guides.
4. Secure the speaker cables with tape.
5. Seat the insulator.
Satellite A20 Maintenance Manual (960-444)
Figure 4-35 Removing the Side cover
FLAT HEAD screw
4 Replacement Procedures
Side cover
4
4-63