4.30 Fluorescent Lamp
4
4.30.7 Replacing the 15.0-inch SXGA+ Sharp Fluorescent Lamp
To disassemble the 15.0-inch SXGA+ Sharp fluorescent lamp, follow the steps below and refer to
Figures 4-113 to 4-122.
CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD module. Be careful not to let dust or other foreign
substances into the LCD module.
Disassembling the 15.0-inch SXGA+ Sharp Fluorescent Lamp
1. Turn the LCD module face down, and remove the protection cover S (A), protection cover
G (B), fixing tape (C) and fixing tape for lead wire (C).
NOTE: 1) Be careful not to damage the TCP or chips.
2) Discard the tapes removed. Do not reuse them.
Figure 4-113 Replacing Sharp fluorescent lamp (SXGA+) (1)
Satellite A20 Maintenance Manual (960-444)
4 Replacement Procedures
4-155