Important Information Before Operation; Toilet Controls - Dometic 3000 Series Owner's Manual

IMPORTANT INFORMATION BEFORE OPERATION

1. Fill freshwater tank and add deodorant to holding tank through toilet bowl.
2. Make sure all guests understand the operation of the toilet system and the
flushing instruction label is easy for guests to read. This label is located
under the seat, and is easily read when the seat is raised.
3. Shut off the toilet system before servicing and do not leave the vehicle with
toilet system circuit breaker on.
4. Never use drain openers, alcohol, solvents, etc. in the toilet.
5. If the toilet does not function properly, refer to the Troubleshooting
section of this manual and repair as necessary. If problem persists, contact your local SeaLand product dealer or
see the Customer Service section of this manual.
1. To add water to the toilet before
using (if necessary), raise flush
handle until desired water level
is reached. (Water flow will stop
automatically after a pre-
programmed period of time).

TOILET CONTROLS

ADD WATER
TO BOWL
OFF
FLUSH HANDLE
OFF
FLUSH
FLUSH and FORGET ® OPERATION
2. To flush toilet, press flush
handle down. Water will flow
into bowl for two seconds, then
flush ball will open. Toilet will not
flush again until water refill cycle
is complete.
Figure 1
3
3. Do not dispose of sanitary
napkins or other non-dissolving
items in toilet, such as facial
tissue or paper towels. These
items can cause plugging of the
system.
ACCESS COVER
CONTROL SWITCHES
®