Handlebar Installation - Eton CXL-150 Service Manual

Remove the handle bar switch on the left handle bar.
Remove rear brake lever bracket assembly.
Remove the bolts attaching the handlebar upper holder.
Remove the handlebar.
INSTALLATION
Put the handlebar on the lower holders.
Make sure the handlebar punch mark match
with the top end of the handlebar lower holders.
Install the handlebar upper holders with
the L or R marks facing forward.
Tighten the forward bolts first, and then tighten
the rear bolts.
Install the handlebar upper holder's cover.
Install the switch housing, aligning the boss with the hole.
Tighten the upper screw first then tighten the lower one.
54