Inspection; Service Limit - Eton CXL-150 Service Manual

INSPECTION

Inspect the cam lobes surface and height of cam
lobes for wear or damage.

SERVICE LIMIT:

Inspect the camshaft and bearings for wear or damage
and replace them if necessary.
Screw a 5mm bolt into the rocker arm shaft threaded
end. Pull on the bolt to remove the shafts and rocker
arms.
Inspect the camshaft holder, rocker arms and rocker
arm shafts for wear or damage.
IN 29.395 mm
EX 29.160 mm
CAM
CAMSHAFT HOLDER
19
BEARINGS
ROCKER ARMS
ROCKER ARM SHAFTS
LOBES