Service Considerations; Tool And Software Requirements - Compaq 12XL125 - Presario - K6-2 533 MHz Maintenance & Service Manual

Service Considerations

Listed below are some of the considerations to consider during the disassembly and
assembly of the Notebook.

Tool and Software Requirements

The following items are required to service the computer:
Compaq screwdriver kit (Spare Part No. 161946-001)
•
Torx T-9 screwdriver
•
3/16-in. and 5mm nut drivers (for screwlocks and standoffs)
•
Small, standard screwdriver
•
Small, Phillips screwdriver
•
Diagnostics software
•
Screws
The screws used in the Notebook are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends that
all screws removed during disassembly be kept with the part that was removed, and then
returned to their proper locations.
Important: As each subassembly is removed from the Notebook, place it away from the
work area to prevent damage.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
S G 1200XL S
ERVICE UIDE ERIES
R S 3
EMOVAL EQUENCE