Chapter 2.2 Service Considerations - Compaq Concerto Maintenance And Service Manual

o Antistatic tape
o Antistatic smocks, aprons, or sleeve protectors
o Conductive bins and other assembly or soldering aids
o Conductive foam
o Conductive table-top workstations with ground cord of 1 megohm resistance
o Static dissipative table or floor mats with hard tie to ground
o Field service kits
o Static awareness labels
o Wrist straps and footwear straps providing 1 megohm +/-10% resistance
o Material handling packages
o Conductive plastic bags
o Conductive plastic tubes
o Conductive tote boxes
o Metal tote boxes
o Opaque shielding bags
o Transparent metallized shielding bags
o Transparent shielding tubes

Chapter 2.2 SERVICE CONSIDERATIONS

Listed below are some of the considerations that should be kept in mind
during the disassembly and assembly of the computer and the FlexConnect.
Tools and Software Requirements
To service the computer and the FlexConnect, you need the following:
o Phillips screwdriver, size P-1
o Torx screwdriver, size T-8
o Flat-bladed screwdriver
o Hex socket driver (3/16)
o Diagnostics software
o Formatted scratch diskettes
o Spudger (DESCO #618 or #621)
o PCMCIA rail spacer
Screws
The screws used in these products are not interchangeable. If an incorrect