Removing The Display Panel Assembly - Compaq 12XL125 - Presario - K6-2 533 MHz Maintenance & Service Manual

Removing the Display Panel Assembly

Note: Illustrations may show parts removed that are not part of this procedure. It is
necessary to remove only the parts listed in the written procedure.
To remove the display panel assembly, complete the following steps:
1. Prepare the computer for disassembly
2. Remove the palmrest cover with TouchPad
3. Remove the keyboard
4. Remove the heatspreader
5. Disconnect the backlight cable attached to the display panel assembly from the
connector on the system board.
Continued on next page.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
(pg 15).
(pg 17).
S G 1200XL S
ERVICE UIDE
(pg 10).
(pg 13).
ERIES
R S 27
EMOVAL EQUENCE