Removing The Display Panel Assembly - Compaq 12XL125 - Presario - K6-2 533 MHz Maintenance & Service Manual

Removing the Display Panel Assembly

Note: Illustrations may show parts removed that are not part of this procedure. It is
necessary to remove only the parts listed in the written procedure.
To remove the display panel assembly, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the Internet Zone cover
3. Remove the button board.
4. Remove the keyboard
5. Remove the Heatspreader
6. Remove one screw from the left side of the cable connector cover and lift the cover
from the chassis.
7. Disconnect the display flex cable by gently pulling up to release it from the connector.
Continued on the next page.
28 R S
EMOVAL EQUENCE
Presario 1200XL Series
Model XL300, XL300A, and XL300B
(pg
(pg 18).
(pg 16).
(pg 17).
P
RESARIO
9).
N M
OTEBOOK AINTENANCE AND
S G 1200XL S
ERVICE UIDE ERIES