Removing The Palmrest Cover With Touch Pad - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Models: 1234, 1235, 1236, 1237, 1238, 1240, 1242, 1250, and 1252
Before You Begin
Removal Sequence
Product Description

Removing the Palmrest Cover with Touch Pad

Disassembly
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
Presario 1200 Series
Specifications
Troubleshooting
Pin Assignments
Parts Catalog
Battery Operations
Index
The palmrest
cover with touch
pad must be
removed to gain
access to any of
the interior
components of the
computer, and it is
the first
component that
has to be removed
to gain access to
the interior
components.
It is not
necessary
to remove
the display
panel
assembly to
NOTE:
access the
interior
components
of the
computer.
To remove the
palmrest cover
with touch pad,
complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Close the
computer and turn
the computer
upside down.
3. Remove four
screws from the
bottom of the
computer.
Next Step