Zif Connectors - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Maintenance & Service Guide
Models: 1234, 1235, 1236, 1237, 1238, 1240, 1242, 1250, and 1252
| Home Page | Notice
Illustrated Parts Catalog
Pin Assignments
Presario 1200 Series
| Preface | Product Description
| Removal & Replacement Procedures
| Battery Pack Operations

ZIF Connectors

The computer uses a zero insertion force
(ZIF) connector for the keyboard cable to the
system board. To remove a cable from a ZIF
connector, lift both corners of the ZIF
connector and slide simultaneously with
constant light force.
Back to
| Troubleshooting
| Specifications
CAUTION: A ZIF connector and
its attached cable can be easily
damaged. Handle only the
connector slide when removing
or replacing a cable. Never pull
or twist on the cable while it is
connected.
CAUTION: When servicing this
computer, ensure that cables
are placed in their proper
location during the reassembly
process. Improper cable
placement can damage the
computer.
Cables and Connectors.