Removing The Palmrest Cover With Touch Pad - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Models: 1246, 1247, 1277, 1278, and 1279
| Home Page
Illustrated Parts Catalog
Removal and Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drive
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
Maintenance & Service Guide
Presario Series
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
Removing the
Palmrest Cover
with Touch Pad
The palmrest cover
with touch pad must
be removed to gain
access to any of the
interior components
of the computer. It
is the first
component that has
to be removed to
gain access to the
interior components.
NOTE:
To remove the
palmrest cover with
touch pad, complete
the following steps:
1. Prepare the
computer for
disassembly.
2. Close the
computer and turn
the computer upside
down.
3. Remove the
battery
4. Remove four
screws from the
bottom of the
computer.
Next Step
It is not
necessary
to remove
the display
panel
assembly to
access the
interior
components
of the
computer.
pack.