Service Considerations; Tool And Software Requirements - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Models: 1234, 1235, 1236, 1237, 1238, 1240, 1242, 1250, and 1252
Before You Begin
Removal Sequence
Product Description

Service Considerations

Listed below are some of the considerations that you should keep in mind
during the disassembly and assembly of the computer.

Tool and Software Requirements

To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)
Torx T-9 screwdriver
3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
Small, standard screwdriver
Small, Phillips screwdriver
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect
screw is used during the reassembly process, it can damage the unit. Compaq
strongly recommends that all screws removed during disassembly be kept
with the part that was removed, then returned to their proper locations.
IMPORTANT:
Return to Removal & Replacement Procedures
Presario 1200 Series
Troubleshooting
Pin Assignments
As each subassembly is removed from the computer, it
should be placed away from the work area to prevent
damage.
Specifications Parts Catalog
Battery Operations
Index