Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual page 46

Models: 1234, 1235, 1236, 1237, 1238, 1240, 1242, 1250, and 1252
Before You Begin
Removal Sequence
Product Description
Presario 1200 Series
Specifications
Troubleshooting
Pin Assignments
Parts Catalog
Battery Operations
Index
4. Turn the computer
over (right side up), pull
forward on the display
latches to release and
open the display
assembly.
5. Lift up front end of
the palmrest cover with
touch pad and remove it
from the groove in the
chassis.
6. Tilt the palmrest
cover with touch pad,
allowing it to rest on top
of the keyboard, and
disconnect the flex cable
from the LIF connector
on the palmrest cover.
When
CAUTION:
replacing the
palmrest cover
with touch pad,
ensure that the
cable is fully
inserted into the
LIF connector on
the system board.
If the metal end
should come in
contact with the
keyboard, damage
may occur to the
computer.
To replace the palmrest
cover with touch pad,
reverse the previous
procedures.
When replacing
the palm rest
cover ensure the
cable is properly
NOTE:
routed through
the slot on the
Upper CPU
cover.
Return to Removal &
Replacement Procedures