Removing The Fan Assembly - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Models: 1234, 1235, 1236, 1237, 1238, 1240, 1242, 1250, and 1252
Before You Begin
Removal Sequence
Product Description

Removing the Fan Assembly

Disassembly
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan
Assembly
System Board
Dip Switch
Settings
Memory
Module
Presario 1200 Series
Specifications
Troubleshooting
Pin Assignments
Parts Catalog
Battery Operations
Index
To remove
the fan
assembly,
complete the
following
steps:
1. Prepare
the computer
for
disassembly.
2. Remove
the palmrest
cover with
touch pad.
3. Remove
the
heatspreader.
4. Remove
the keyboard.
5. Remove
the display
panel
assembly.
6. Remove
the hard
drive.
7. Remove
the Upper
CPU cover.
8. Lift the fan
assembly
from the
chassis slot
and
disconnect
the fan cable
from the
connector on
the system
board.
Next Step