Universal Consumer Interface (Uci) 0.5 - If Equipped; Connecting The Ipod Device; Controlling The Ipod Using Radio Buttons - Dodge 2010 Journey Owner's Manual

UNIVERSAL CONSUMER INTERFACE (UCI) 0.5 —
IF EQUIPPED
NOTE: This section is for sales code RES/REL and
REQ/RET radios only with uconnect . For sales code
RBZ/REN/REZ touch screen radio and REU/REX/RE1
radio, refer to the separate User's Manual.
This feature allows an iPod mobile digital device to be
plugged into the vehicle's sound system through a con-
nector (UCI connector) using an optional connection
cable (available through MOPAR ). See your authorized
dealer for details.
Using this feature,
• the iPod audio can be played on the vehicle's sound
system, providing metadata (Track Title, Artist, Al-
bum, etc.) information display on radio.
• the iPod can be controlled using the radio buttons to
Play, Browse and List the iPod contents.
UNDERSTANDING YOUR INSTRUMENT PANEL 263
• The iPod battery charges when plugged into the UCI
connector (if supported by the specific iPod device)

Connecting The iPod Device

Use the optional connection cable to connect an iPod to
the vehicle's UCI connector (which is located in the glove
box or center console on some vehicles. This location may
vary with vehicle). Once the iPod is connected and
synchronized to the vehicle system (this may take a few
seconds to connect), the vehicle brand logo appears on
the iPod display, and it starts charging and is ready for
use by pressing radio switches as described below.

Controlling The iPod Using Radio Buttons

To get into the UCI (iPod ) mode and access a connected
iPod , press the "AUX" button on the radio faceplate.
Once in the UCI (iPod ) mode, the iPod audio track (if
available from iPod ) will start playing over the vehicle
audio system.
4