Text Messages; Starting The Diagnostic Programs And Viewing The Test Log - IBM 6219 - IntelliStation M - Pro User Manual

Text messages

The diagnostic text message format is as follows:
Function Name: Result (test specific string)
where:
Function Name
Result
Test Specific String

Starting the diagnostic programs and viewing the test log

The IBM Enhanced Diagnostics programs isolate problems from your computer
hardware and software. The programs run independently of the operating system
and must be run either from a CD or diskette. This method of testing is generally
used when other methods are not accessible or have not been successful in
isolating a problem suspected to be hardware related.
A Device Drivers and IBM Enhanced Diagnostics CD comes with your computer.
You can also download the latest version of the diagnostic programs from
http://www.ibm.com/pc/support/ on the World Wide Web.
66
IBM IntelliStation M Pro Type 6219: User's Guide
is the name of the function being tested when the error occurred. This
corresponds to the function code (fff) described in the previous list.
can be one of the following:
Passed
This result occurs when the diagnostic test is completed without
any errors.
Failed This result occurs when the diagnostic test discovers an error.
User Aborted
This result occurs when you stop the diagnostic test before it is
complete.
Not Applicable
This result occurs when you specify a diagnostic test for a device
that is not present.
Aborted
This result occurs when the test could not proceed because of the
system configuration.
Warning
This result occurs when a possible problem is reported during the
diagnostic test, such as when a device that is to be tested is not
installed.
is additional information that is used to analyze the problem.