Table of Contents
Advertisement
5. Install the server in the rack. For details, see the Rack Installation Instructions
6. To attach peripheral devices and connect the power cord, continue with
Connecting the cables
The following illustrations show the input and output connectors on the front and
rear of the server.
Front
Rear
Power-cord
connector
For detailed information about external options and how to connect them to the
server, see the documentation that comes with these options.
Depending on the options that you install, after cabling the server, you might need
to run the Configuration/Setup Utility program to update the server configuration.
For more information, see "Updating the server configuration" on page 28 and the
User's Guide on the IBM Eserver Documentation CD.
To attach non-USB devices to the server, use the cables that come with the devices
and connect the cables to the appropriate ports on the server.
To attach a USB device to the server, use the cable that comes with the device and
connect the cable to one of the four USB connectors on the server.
Important: If a Remote Supervisor Adapter II is installed in the server, the USB 1
v If you want to attach a keyboard or mouse to this server, you must use a USB
v The server supports keyboardless operation. If a USB keyboard is not connected
that come with the server.
"Connecting the cables."
Note: If you installed a SCSI drive, check the LEDs to verify proper operation
after you reconnect the power cord.
Serial
connector
Video
connector
connector is disabled.
keyboard or a USB mouse. For detailed information about the USB keyboard and
how to connect it to the server, see the documentation that comes with the USB
keyboard.
to the server, when the server is turned on or restarted, error message 301 will
appear during POST. No action is required. POST will continue within one
minute.
USB 2 connector
USB 1 connector
Gigabit Ethernet 1
connector (LAN1)
USB connectors
Gigabit Ethernet 2
connector (LAN2)
Chapter 2. Installing options
27
Advertisement
Table of Contents
