Operation - Dodge 2008 DH Ram Owner's Manual

The radio display will be used for visual prompts from
the UConnect system such as CELL or caller ID on
certain radios.

Operation

Voice commands can be used to operate the UConnect
system and to navigate through the UConnect menu
structure. Voice commands are required after most
UConnect system prompts. You will be prompted for a
specific command and then guided through the available
options.
• Prior to giving a voice command, one must wait for
the beep, which follows the Ready prompt or another
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying Setup and then
Phone Pairing, the following compound command
can be said: Setup Phone Pairing.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91
• For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command when you are asked for it. For
example, you can use the combined form voice com-
mand Phonebook New Entry, or you can break the
combined form command into two voice commands:
Phonebook and New Entry. Please remember, the
UConnect system works best when you talk in a
normal conversational tone, as if speaking to someone
sitting a few feet/meters away from you.
Voice Command Tree
Refer to "Voice Tree" in this section.
Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say Help following
the beep. The UConnect system will play all the options
at any prompt if you ask for help.
3