Setting the CAMERA ASSIST MENU
This product is equipped with various camera rig adjustment assist functions for 3D viewing. Use the functions for camera adjustment in
shooting.
Menu Operations
1
Press the CAMERA ASSIST button.
➔
The CAMERA ASSIST MENU appears.
Only works when the SDI input is selected and images available for the
●
MIX mode are input.
When the CAMERA ASSIST button is pressed while "MARKER" is
●
displayed, "MARKER" disappears and the CAMERA ASSIST MENU appears.
2
Press the
button to select an item,
and then the button to proceed to the next screen.
For some items, adjustments will be made by pressing
●
3
Press the CAMERA ASSIST button to finish the menu operation.
Alternetively, press the MENU button to close the menu screen.
●
CAMERA ASSIST MENU
RIG SETTING
Depending on the stereo camera rig condition, configure the horizontal flip/vertical flip/180-degree rotation settings of an image.
●
The settings are retained even when the CAMERA ASSIST MENU closes.
Half mirror
Half of the image is flipped horizontally.
●
Select "R-H-MIRROR."
Setting value
OFF
R-H-MIRROR
*1
R-V-MIRROR
L-H-MIRROR
*1
L-V-MIRROR
*1
R-ROTATION
*1
L-ROTATION
*1
Vertical flip and 180-degree rotation delay the image by 2 frames. The other image will also be delayed and synchronized.
14
Half of the image is flipped vertically.
●
Select "R-V-MIRROR."
Content
Does not rotate or flip the image
Horizontally flips images input into the SDI IN 2/R terminal
Vertically flips images input into the SDI IN 2/R terminal
Horizontally flips images input into the SDI IN 1/L terminal
Vertically flips images input into the SDI IN 1/L terminal
Rotates images input into the SDI IN 2/R terminal by 180 degrees
Rotates images input into the SDI IN 1/L terminal by 180 degrees
.
Half mirror
CAMERA ASSIST MENU
Parallel twin-flex
Half of the image is rotated 180 degrees.
●
Select "R-ROTATION."