Table of Contents
Advertisement
•
Place the unit on a level surface away from sources of direct sunlight or excessive heat.
•
Protect your furniture when placing your unit on a natural wood or lacquered finish. A cloth or other protective
material should be placed between it and the furniture.
•
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as
Benzene, thinner or similar materials can mar the surface of the case.
1. Depending on your location and whether or not DST (Day Saving Time) is in effect, set the DST Switch
located on the left of the unit to +1 to advance the time one hour or to -1 to subtract an hour. Activating the
+1 switch will turn the DST icon on.
2. Press and hold the Time Set Button until the time display blinks.
3. Press the << or >> Button to adjust to the correct time. Press and hold the button for faster forward or back-
ward adjustment.
4. Remember to set the correct AM or PM. The PM Indicator is located on the upper right side of the display;
there is no AM indicator
5. Press the Time Set Button again. The year display will blink.
6. Press the << or >> Button to adjust to the correct year. Press and hold the button for faster forward or back-
ward adjustment.
7. Press the Time Set Button again. The date display will blink.
8. Press the << or >> Button to adjust to the correct date. Press and hold the button for faster forward or back-
ward adjustment
9. Press the Time Set Button again or wait for about 10 seconds to exit the time setting process. Two beeps
will confirm time setting mode is complete.
Maintenance
Daylight-Saving Time
Setting Time and Date
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the T436B - Clock Radio With Time Projector and is the answer not in the manual?
Questions and answers
My dad bought the T436B 06Jan2023. He passed away the day before Mother's day. I have it now. The projector does not work. What can you do to help me get this fixed?
To fix the projector on the Timex T436B Clock Radio, follow these steps:
1. Check the Projection Switch – Ensure the Projection Switch on the right side of the unit is set to "Time" to project the time or "Time/Alarm" to project both the time and the earliest set alarm time. If it is set to "Off," the projection function will not work.
2. Adjust the Projector Arm – Tilt the projector arm to aim the projected display for the best viewing angle.
3. Focus the Image – Turn the Focus Dial to adjust the sharpness of the projected image.
4. Flip the Image – If needed, press the Flip Image Button to rotate the projection vertically.
If the projector still does not work, check that the clock radio is properly powered and that there are no obstructions blocking the projection lens.
This answer is automatically generated
Cannot get any sound from the unit.
The Timex T436B Clock Radio With Time Projector may produce no sound if the unit is turned off. Press the Alarm Reset/Power On/Off Button to turn it on. If the unit is in Sleep Mode, it may have shut off automatically after the selected time. Other possible reasons not directly stated but implied by the manual include improper use, damage due to heat, moisture exposure, or blocked ventilation, which could affect internal components.
This answer is automatically generated