Yamaha CRW2100SZ - CRW - CD-RW Drive Quick Start Manual page 17

2. Remove the cover of your computer carefully to allow access to the inside of the computer
(Consult your computer's operating manual for information on removing the cover.)
3. Before touching any of the components inside your computer, first ground yourself
by touching the metal case of your computer. This will prevent the unwanted discharge
of static electricity.
Drain any static charge
4. Select an available drive bay that can hold your new 3-in-1 CD-RW drive. Most computers
have a blank cover plate over the empty drive bay. These plates typically snap into place
although some may be secured by screws. Consult your computer's documentation
and then remove the cover plate.
16