Yamaha CRW2100SZ - CRW - CD-RW Drive Quick Start Manual page 11

Important Note: If you are using other SCSI devices, be sure to use a unique ID number for each device.
SCSI ID Setting:
Important Note: If you are using Window 95, 98, or ME and the SCSI ID setting on the rear panel is the same
as the number assigned to another SCSI device, the Plug and Play component of Windows 95, 98 or ME can
automatically assign an unused number to your new CD-RW drive (SCAM protocol level 1- if SCAM is enabled).
Please refer to the SCSI Device Connection Diagram (illustration below) for a practical
example of how SCSI devices may be set to function together.
3.3.3) Parity Setting of your new 3-in-1 CD-RW Drive
• Parity ON (with a jumper): Parity Check will be performed. Normally, use this setting.
• Parity OFF (without a jumper): Parity Check will not be performed.
1 2 4 1 2 4
SCSI ID 0 SCSI ID 1
1 2 4 1 2 4
SCSI ID 4 SCSI ID 5
* Use jumper connectors to short the locations shown in black.
1 2 4 1 2 4
SCSI ID 2 SCSI ID 3
1 2 4 1 2 4
SCSI ID 6 SCSI ID 7
10