Front Bezel Security - HP rp5800 Maintenance And Service Manual

Front Bezel Security

The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove one of the five silver 6-32 standard screws located on the front of the chassis behind
the bezel.
Figure 7-3
5. Replace the front bezel.
44 Chapter 7 Removal and Replacement Procedures
(Access Panel on page
(Front Bezel on page
Retrieving the Front Bezel Security Screw
(Preparation for Disassembly on page
42).
43).
41).