Engine Installation - DAELIM HISTORY 125 Service Manual

● Remove the RH./LH. radiator hose, remove the
RH./LH. radiator hose from the frame setting clamp.
● Loosen the U-nut securing the engine hanger.
● Loosen the rear cushion lower bolt.
● Remove the engine. (with the rear swing arm and rear
wheel attached)
● Remove the rear swing arm. (⇨13-8)
● Remove the rear wheel. (⇨13-3)
● Remove the rear wheel mud guard. (⇨4-11)

ENGINE INSTALLATION

● Install in the reverse order of removal.
NOTE
•Take precautions not to damage wiring and cable.
•Take precautions not to damage the threaded part of
bolts.
•Arrange the cable, tubes and wiring in the right
positions.
TORQUE VALUE
ENGINE HANGER BOLT (FRONT) : 4.5㎏f·m
● Check the following after the engine is installed.
-Engine oil
-Electric systems.
-Adjust of the parking brake free play.
-Inspection of the throttle cable operation.
(REAR) : 4.5㎏f·m
ENGINE REMOVAL
RADIATOR HOSE
U-NUT
LOWER BOLT
6-3