Carburetor Cleaning; Float Chamber/Float/Jet Assembly - DAELIM HISTORY 125 Service Manual

CARBURETOR CLEANING

● After removing all parts, blow open air and fuel
passages in the carburetor body with compressed air.
CAUTION
•Cleaning the air and fuel passages with a piece of
wire will damage the carburetor body or fuel pump.
MAIN JET
NEEDLE JET
FLOAT BODY
FLOAT CHAMBER/FLOAT/JET
ASSEMBLY
● Install the needle jet, needle jet holder, main jet and
slow jet.
● Tighten the pilot jet until it seats lightly, then turn it
out as much as the number recorded during removal.
● Install the pilot jet rubber.
SLOW JET
DIAPHRAGM
FLOAT
CARBURETOR BODY
PLUNGER ASS'Y
JET NEEDLE
PILOT JET
FLOAT VALVE
FUEL SYSTEM
SPRING
DIAPHRAGM COVER
PILOT JET
5-7