DAELIM DAYSTAR Service Manual page 91

Cylinder Head / Valve
● Install the valve springs. The springs tightly
would coils should face toward the cylinder
head.
● Install the springs retainer.
● Compress the valve spring and install the valve
cotters.
＊ ＊ NOTE
• To prevent the loss of tension, do not compress
the valve springs more than necessary to install
the valve cotters.
Tool: Valve spring compressor
● Tap the valve stems gently two or three times
with a soft hammer to firmly seat the cotters.
＊ ＊ NOTE
• Be careful not to damage the valve.
● Coat a new O-ring with engine oil and install it
into the carburetor insulator groove.
● Install the carburetor insulator with the
mounting bolt tightly.
● Install the cam chain tensioner and tighten the
pivot bolt.
Torque : 1.1kgf-m(11N.m)
● Install the spark plug.
Torque : 1.1kgf-m(11N.m)
8-12
For Cylinder Head For Cylinder Head For Cylinder Head For Cylinder Head
For Cylinder Head For Cylinder Head For Cylinder Head For Cylinder Head
For Cylinder Head For Cylinder Head
For Cylinder Head For Cylinder Head For Cylinder Head
Cam Chain Tensioner Cam Chain Tensioner
Cam Chain Tensioner Cam Chain Tensioner
Cam Chain Tensioner Cam Chain Tensioner Cam Chain Tensioner Cam Chain Tensioner
Cam Chain Tensioner Cam Chain Tensioner Cam Chain Tensioner Cam Chain Tensioner
Cam Chain Tensioner
Valve Spring Compressor Valve Spring Compressor
Valve Spring Compressor Valve Spring Compressor
Valve Spring Compressor Valve Spring Compressor Valve Spring Compressor Valve Spring Compressor
Valve Spring Compressor Valve Spring Compressor Valve Spring Compressor Valve Spring Compressor
Valve Spring Compressor
Pivot Bolt Pivot Bolt Pivot Bolt Pivot Bolt
Pivot Bolt Pivot Bolt Pivot Bolt Pivot Bolt
Pivot Bolt Pivot Bolt
Pivot Bolt Pivot Bolt Pivot Bolt