Surround Back Speaker Position - Pioneer Elite VSX-49TXi Operating Instructions Manual

Surround Back Speaker Position

This setting has been specifically designed to set the distance between your surround back speakers, If you
don't have surround back speakers, or just have one, you won't be able to select this setting. The Advanced
Speaker Array (ASA) system was developed with the principles of THX Ultra2 technology in order to get
optimum sound from your surround back speakers. You choose whether your speakers are 0–1 feet apart
(setting them together is best for ASA), 1–4 feet apart or more than 4 feet apart. For more information about
ASA see page 108 and for more information on THX speaker placement see p.110.
ENTER
5˜∞˜2˜3˜ENTER buttons
1
4.THX Audio Setup
[ 1.Ultra2 SW Setup ]
[ 2.SB SP Position
[Return]
2
4.3. SB SP Position
SBL - SBR
[ 0 – 1 ft
SBL SBR
[Return]
4.3. SB SP Position
SBL - SBR
[ <1 – 4 ft
SBL SBR
[Return]
3
4.3. SB SP Position
SBL - SBR
[ 4 ft< ]
SBL
[Return]
Follow steps 1-4 on page 104, if necessary, to get to
the starting point mentioned here.
STANDBY/ON
1 SB SP POSITION should be selected
2 Use the 2 3 buttons to select 0–1 ft,
3 Use the 5∞ buttons to select
]
4 To finish THX AUDIO SETUP use the
]
]
SBR
if it isn't use the 5∞ buttons to
select it. Press ENTER.
<1–4 ft or 4 ft<.
RETURN and press ENTER.
5∞ buttons to select RETURN and
press ENTER. Then use the 5∞
buttons to select EXIT and press
ENTER.
Advanced Setup
105