Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0 Manual page 58

58 About Out of Band Management Component pages
Update ASF Configuration Settings task
Options on the Update ASF Configuration Settings task page
Table 2-25
(continued)
Option
Wake on ARP or RMCP traffic
Enable RMPC
Allow RMCP ping only
Modify events settings
Enable platform event trap (PET)
messages
PET retransmission interval
Modify system management bus
settings
Legacy poll interval
Legacy poll delay
Modify security settings
Use security management (ASF
2.0)
Use ASF 1.0 compatibility
Session timeout
Description
Check to configure the network adapter to wake the
computer upon receiving ARP or RMCP traffic while
the computer is in low-powered mode.
Check to enable the receipt and handling of Remote
Management Control Protocol (RMCP) messages by
the network adapter.
Check to disable all management functionality except
for sending out a presence ping, which lets the
management console discover ASF capabilities of the
client computers.
Check to modify the settings in this group when the
task runs.
If you want the network adapter to transmit PET
messages, check this option.
Specify the time interval (in seconds) between
retransmission of a PET message. Default: 20 seconds.
Check to modify the settings in this group when the
task runs.
Type the interval at which the network adapter
monitors legacy SMBus devices, such as the chassis
intrusion sensor. Default: 15 seconds.
Type the time delay before the first legacy SMBus
device poll is made. Default: 15 seconds.
Check to modify the settings in this group when the
task runs.
Check to enable a set of security extensions that
provide authentication and integrity services for
Remote Management Control Protocol (RMCP)
messages.
Check to turn on ASF 1.0 backward compatibility
support.
In this box, specify the timeout for authentication
during session setup. Default: 300 seconds.