Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0 Manual page 51

Options on the Intel AMT systems page (continued)
Table 2-21
Option
Assign profile
Create assignments
Re-configure
About Out of Band Management Component pages
Description
This operation lets you assign an FQDN and a configuration profile
to the selected Intel AMT device.
Unconfigured device is configured using the supplied FQDN and
profile the next time the Hello message is sent. If the device is
already configured, you can check Re-configure if settings change
to apply new settings to the Intel AMT device. You can also
re-configure the computer later using the Re-configure symbol
on the toolbar.
For more information, see the Out of Band Management
Component Implementation Guide.
This operation lets you assign profiles to multiple Intel AMT
computers.
Check Override existing profile assignments to assign the profile
that is defined on this page to the Intel AMT computers that
already have a configuration profile assigned.
This option changes the profile assignment, but does not
re-configure the Intel AMT device with the new configuration
profile. If you want to re-configure Intel AMT devices, check
Re-configure Intel AMT if assignments change.
For more information, see the Out of Band Management
Component Implementation Guide.
This operation applies all the current settings in the profile that
is associated with each Intel AMT device.
Intel AMT systems page
51