Wireless Profiles: Add Wireless Profile Dialog Box; Configuration Profiles Page; Setup And Configuration Profile: General Tab - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0 Manual

Wireless Profiles: Add Wireless Profile dialog box

Configuration Profiles page

Setup and configuration profile: General tab

For more information, see the Out of Band Management Component Implementation
Guide.
This dialog box lets you configure the wireless settings that the Intel AMT devices
should use in sleep (S3, S4, or S5) state when the operating system cannot be used
to configure wireless protocols.
Options on the Wireless profiles: Add Wireless Profile dialog box
Table 2-5
Option Description
Profile name Type a name for this profile.
SSID Type an optional Service Set ID (SSID): a 1 to 32 character string naming
a specific wireless LAN.
Data Encryption Select a Key Management scheme (WPA or RSN) and an Encryption
Algorithm (TKIP or CCMP). These choices must correspond to the
settings that are used in the specific wireless LAN environment.
Authentication Either provide a pass phrase or select one of the existing 802.1x profiles
or create a new one.
See "Auxiliary profiles: 802.1x Profiles page"
Configuration profiles contain the Intel AMT device configuration parameters.
Profiles determine which features are enabled in the device, what authentication
mechanism is used, and which users have access to device features. One or many
profiles can be defined. For example, use a different profile for different sites.
Each profile can be assigned to one or more Intel AMT devices.
For more information, see the Out of Band Management Component Implementation
Guide.
On this tab, type general information that pertains to this profile.
About Out of Band Management Component pages

Configuration Profiles page

on page 22.
29