Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0 Manual page 41

The default settings are adequate for normal operation of Intel SCS. However, if
you want to use Kerberos users or 802.1x profiles, you must integrate Intel SCS
with Active Directory and check Active Directory Integration on this page.
For more information, see the Out of Band Management Component Implementation
Guide.
Options on the General page
Table 2-15
Option
Listen port
Default profile
Active Directory
Integration
AllowRemoteConfiguration
Intel SCS Server
Remote Configuration
Certificate status
About Out of Band Management Component pages
Description
Each instance of Intel SCS listens for Hello messages from
the Intel AMT devices on a defined TCP port. Type the TCP
port that you want Intel SCS to use for listening.
The default port is 9971.
Select the profile that you want to assign to new Intel AMT
computers by default.
If checked, the Intel SCS server adds AMT objects to Active
Directory. This enables the use of Kerberos authentication
and the Active Directory users list. Active Directory is also
required for 802.1x profiles. Before you check this option,
you must integrate Intel SCS with Active Directory.
For more information, see the Out of Band Management
Component Implementation Guide.
Intel AMT releases 2.2, 2.6, 3.0, 4.0, 5.0 and later support
Remote Configuration.
Check this option to enable Intel SCS to accept Remote
Configuration requests from Intel AMT devices.
For more information, see the Out of Band Management
Component Implementation Guide.
Displays the FQDN of the OOB site server computer with
which Out of Band Management Component is configured
to work.
Displays the status of the Remote Configuration certificate.
If you want to use Remote Configuration, you must install
a valid certificate.
For more information, see the Out of Band Management
Component Implementation Guide.
41
General page