Auto-Sync Feature
Auto-Sync automatically synchronizes your WMA100 with your router or
gateway. With the Auto-Sync button highlighted on the Setup menu
(shown to the right), press OK on the Remote Control.
•
If you see the message Auto Sync was successful, configuration is now
complete. You are now ready to start using your WMA100!
•
If the SSID Discovery Screen displays (shown to the right), the
WMA100 has recognized more than one network.
Use the Up/Down Arrow buttons to select your SSID (network name),
then press OK.
If you select an SSID that does not have a WEP or WPA key,
configuration is now complete. You are ready to start using your
WMA100!
•
If you select an SSID that does have a WEP or WPA key, the Wi-Fi
Setup Screen (shown to the right) will automatically display.
1 Use the Down Arrow button to select either "WEP Enabled" or
"WPA-PSK Enabled," then press OK.
2 Complete the remaining fields according to the settings of your
router/gateway, select Save, then press OK.
Wi-Fi configuration is now complete!
ViewSonic Wireless Media Adapter
Setup Main Menu with
Auto-Sync pre-selected
SSID Discovery Screen
30