Front Panel: Buttons And Leds - ViewSonic WMA100 - Wireless Media Adapter User Manual

Front Panel: Buttons and LEDs

The Power button, located on the front of the WMA100, has three power
modes: On (blue LED), Standby (amber LED), and Off. See Chapter 2 for
more information about Auto-Sync.
The other two LED indicators show network connection (link) status and
activity. See the table below for meaning of LED light codes.
Indicator
Light Code
(LED)
Power Solid Blue
Solid Amber
WLAN Solid Green
(Wireless
LAN)
Blinking Green
LAN Solid Green
(Wired LAN)
Blinking Green
ViewSonic Wireless Media Adapter
Meaning of Code
On: Unit is ready to use.
Standby: Unit is in Power Saving
mode.
Link: Successful network
connection.
Activity: Data transfer is in process; a
faster blinking light means more WLAN
activity; also indicates WMA100 is
searching for an Access Point or
WLAN connection.
Link: Successful network
connection.
Activity: Data transfer is in process;
a faster blinking light means more
LAN activity.
Power Button &
WLAN
Power LED
LED
(Wireless
Blue = On
LAN Link &
Amber = Standby
Activity)
NOTE: Without pressing the Power button,
power is On (blue LED) when you plug in the
WMA100.
•
If you press the Power button when the LED
is blue, the WMA100 will go into Standby
Mode (amber LED).
•
To return to the Power On mode, press the
Power button again.
LAN LED
(Wired
LAN Link &
Activity)
5