Step 1: Install Software And User Guide - ViewSonic WMA100 - Wireless Media Adapter User Manual

Step 1: Install Software and User Guide

1 Insert the supplied Networking Companion CD into the CD-ROM drive
of the PC connected to your wired or wireless network.
NOTE: If the CD does not auto-start, right-click Start on the Windows
desktop, select Explore, double-click the CD-ROM icon, then double-
click the Setup icon.
The CD contains myView Media Manager media server software,
which enables each networked PC to share content with your WMA100.
2 From the Home page of the ViewSonic Networking Setup Wizard
(shown to the right), click Wireless Media Adapter, then on the next
screen click Wireless Media Adapter Software.
3 When the InstallShield Wizard displays, follow the on-screen
instructions. After you click Finish, restart your PC.
SUGGESTION:
If you plan to add the WMA100 to a wireless network, write your router's
Network Name (SSID), the WEP or WPA key, etc. on some paper. You
may need this information later.
PC Power Settings
To ensure that the media server software is able to share content with
your WMA100, it is recommended that you change your PC's System
Standby and System Hibernate power settings to Never. See PC
Power Settings in the Appendix for more information.
ViewSonic Wireless Media Adapter
Networking Companion CD Wizard with
"Wireless Media Adapter" selected
12