Step 3: Install Remote Control Batteries
•
Remove the Battery Compartment Cover, then insert two (2) supplied
AA batteries into the Remote Control.
•
Be sure to match (+) and (-) as shown in the illustration.
Step 4: Turn on TV Power and Verify
WMA100 Power is ON
1 Turn on your TV (or other display) and, if applicable, turn on your
External Sound System.
2 Verify that the WMA100 power is ON (blue LED).
If the LED is Amber, the WMA100 is in Standby Mode.
Press the Power button to change to ON Mode.
NOTE: If there is no screen image, the screen mage does not look
clear, or if the screen image is shifted to the left or right, see Step 6:
Adjusting the Screen Image for further instructions.
ViewSonic Wireless Media Adapter
(-)
(+)
(+)
(-)
(-)
(+)
(+) (-)
Back of Remote Control
Power Button &
Power LED Indicator
•
Blue = On
•
Amber = Standby
Battery
Compartment
Cover
15